Sdc 1511T EXIT CHECK DELAYED EGRESS EMLOCK Manuel d'utilisateur télécharger pdf

P:\INSTALLATION INST\Delayed Egress\INST-1511ST\INST-1511ST.vsd Rev G3 10-13 Page 1

INSTALLATION INSTRUCTIONS

EXIT CHECK

DELAYED EGRESS EMLOCK

1511S / 1511T

PUSH UNTIL ALARM

SOUNDS. DOOR CAN BE

OPENED IN 15 SECONDS.

Application

When unauthorized egress is initiated, the Exit Check

delays egress through the door for a period of 15 or 30 seconds.

An integral digital countdown display and voice commands inform the person intending to exit of the seconds remaining

to unlock. Meanwhile, the person exiting must wait allowing personnel or security respond. The door unlocks after the

15 or 30 second delay period has elapsed, permitting egress. A signal from the fire/life safety system will release the

lock immediately for uninhibited egress in an emergency.

Exit Check

applications include:

Restricting the egress of patients for their own safety.

Restricting the egress of commercial center patrons for security application needs.

Controlling pedestrian traffic in transportation facilities, including airport jetways and tarmacs

California Building

Code Compliant

KEEP PUSHING. THIS DOOR

WILL OPEN IN 15 SECONDS.

ALARM WILL SOUND.

Standard Features

1650 lbs. Holding Force

15 or 30 Second Exit Delay when activated.

1 or 2 Second Nuisance Delay

75dB Alarm Tone with Digital Display & Selectable Voice

Instruction

Choice of Activation Trigger:

- Door Movement

- Exit Device w/ REX Switch

- Touch Sense Bar w/REX Switch

Auto Power-Up – Occurs when power is restored and/or

the fire panel is restored. (When Allowed by Code)

Manual Power-Up – This is a UBC & California Building

Code Compliant Feature – Only after power restoration

and fire panel reset may the lock be reset manually at the

opening. Lock can be reset with the built-in reset key

switch or, a key switch or keypad adjacent to the door.

Vandal resistant Proximity Sensor Trigger

Auto Sensing 12/24VDC input power

Connection for Tandem Option (Pairs of Doors)

Optional Features

D = DPS Door Position Switch

B = BAS Bond Alert Sensor

A = ATS Anti Tamper Switch

E = Energy Saver Option (1200 lb. Holding Force)

Building & Fire Life Safety Code Compliant

IBC International Building Code

IFC International Fire Code

NFPA 101 Life Safety Code

NFPA 1, UFC, Uniform Fire Code

UBC Uniform Building Code

CBC California Building Code

SBC Standard Building Code

BOCA National Building Code compliant

Chicago Building Code compliant

GWXT, GWXT7 - Auxiliary Locks - UL,cUL Listed

FWAX - Special Locking Arrangements - UL Listed

California State

Fire Marshal Listed

CSFM #3774-0324:103

Only the 1511S and the 1511T

have been UL listed as Special

Locking Arrangements to UL

Standard 294, and NFPA 101.

801 Avenida Acaso, Camarillo, Ca. 93012 • (805) 494-0622 •

www.sdcsecurity.com • E-mail: service@sdcsecurity.com

1 2 3 4 5 6 ... 12 13

Résumé du contenu

Page 1 - Code Compliant

P:\INSTALLATION INST\Delayed Egress\INST-1511ST\INST-1511ST.vsd Rev G3 10-13 Page 1INSTALLATION INSTRUCTIONSEXIT CHECK®DELAYED

Page 2 - (BOCA/Chicago)

DIP SWITCH SETTINGSREQUEST TO EXIT PERIOD – The Request to Exit (REX) time is selectable for 1, 15, 20, or 30 seconds. The REX time is the period of

Page 3 - Specifications

Dip Switch Settings By Model Option CodeP:\INSTALLATION INST\Delayed Egress\INST-1511ST\INST-1511ST.vsd Rev G3 10-13 Page 1

Page 4 - Center punch on mark

STEP 1. After the lock has been mounted to the door and frame per the provided template, feed the wiring through the access hole and out to the co

Page 5 - THE LOCK AS THE DOOR STOP.)

Sense Bar Trigger Non-LatchingPSB560, MSB550PowerPT-2PT-3Wall Mount Reset Station (Optional)728928728L702RU101-1AKPowerLatch Monitoring Strike Trigger

Page 6 - Display Modes

1511S Operational DescriptionThe door is closed and secured by latching hardware. The model 1511S Exit Check locks the door in the secured positio

Page 7

Included in Package1511S EMLOCK HOUSING ASSY. & MOUNTING PLATE728Single station two function key switch control for alarm reset and access or sust

Page 8 - System Operation

Door and Frame ReferenceDoor and Frame Preparation InstructionsHINGE SIDE OF FRAME(OPPOSITE FROM LOCK)PAPER TEMPLATESTEP 1. Locate the paper template

Page 9

STEP 1. Mount armature to door. (See figures 2A, 2B & 2C.)STEP 2. Install the mounting plate (filler plate and/or angle bracket if needed – see

Page 10

P:\INSTALLATION INST\Delayed Egress\INST-1511ST\INST-1511ST.vsd Rev G3 10-13 Page 6Typical System Wiring –Single Door (Model 1511S)3

Page 11

P:\INSTALLATION INST\Delayed Egress\INST-1511ST\INST-1511ST.vsd Rev G3 10-13 Page 73 or 5conductors8 or 10 conductorsPowerSupplyTo

Page 12

P:\INSTALLATION INST\Delayed Egress\INST-1511ST\INST-1511ST.vsd Rev G3 10-13 Page 83 or 5conductors8 or 10 conductorsPowerSupplyTo Fi

Page 13

Wiring Details & Functions (ALL OPTIONS SHOWN) P:\INSTALLATION INST\Delayed Egress\INST-1511ST\INST-1511ST.vsd Rev G3 10-13 Page

Commentaires sur ces manuels

Pas de commentaire

Sdc 1511T EXIT CHECK DELAYED EGRESS EMLOCK Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la maison Sdc 1511T EXIT CHECK DELAYED EGRESS EMLOCK. SDC 1511T EXIT CHECK DELAYED EGRESS EMLOCK User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la maison Sdc 1511T EXIT CHECK DELAYED EGRESS EMLOCK